DEVELOPMENT OF PORTABLE COIN SEPARATOR BY USING A MOTION TECHNIQUE

Authors

  • Hanipah binti Ghazali School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, Cawangan Terengganu, Kampus Bukit Besi, 23200 Bukit Besi, Dungun, Terengganu
  • Muhammad Thaqif bin Mohd Nasil School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, Cawangan Terengganu, Kampus Bukit Besi, 23200 Bukit Besi, Dungun, Terengganu

Keywords:

coin separator, design, fabrication, Pugh Chart

Abstract

Counting coins with high accuracy and speed was a challenging problem for sellers and stores, as well as consumers. In this project, a coin separator machine can separate the coins accurately. The design of this coin separator is made to make it easy for the user to get the total quantity of each coin and the total separation amount. Coin receiver trays were used because they act as coin selectors to determine the value of coins in a sorting system designed using a motion method to distribute coins to the appropriate coin slot tray. The process used to make this coin separators was design process, material selection, cost estimation, fabrication, and performance test. The material used were aluminium plate, hollow steel, angle steel, and mild steel. Even with limited materials, the project was well executed and functional.

Downloads

Published

01-06-2022

Issue

Vol. 13 No. 1 (2022)

Section

Articles

License

Journal of Engineering Technology (JET)  is an open-access journal that follows the Creative Commons Attribution-Non-commercial 4.0 International License (CC BY-NC 4.0)

How to Cite

Hanipah binti Ghazali, & Muhammad Thaqif bin Mohd Nasil. (2022). DEVELOPMENT OF PORTABLE COIN SEPARATOR BY USING A MOTION TECHNIQUE. Marine Frontier, 13(1), 49-58. https://ejournal.unikl.edu.my/index.php/mf/article/view/445