FABRICATION OF RECHARGEABLE SCREWDRIVER FOR SMALL-VOLUME ASSEMBLY PROCESS

Authors

  • Yusuff Badrisyah bin Mohd Din School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, UiTM, Johor Branch, Masai, Malaysia
  • Kamariah Md Isa School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, UiTM, Johor Branch, Masai, Malaysia
  • Ros Atikah Abdul Kadir School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, UiTM, Terengganu Branch.,Bukit Besi Campus, Dungun Terengganu, Malaysia
  • Ainaa Maya Munira Ismail School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, UiTM, Johor Branch, Masai, Malaysia
  • Hazriel Faizal bin Pahroraji School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, UiTM, Johor Branch, Masai, Malaysia
  • Ab Aziz bin Mohd Yusof School of Mechanical Engineering, College of Engineering, Universiti Teknologi MARA, UiTM, Johor Branch, Masai, Malaysia

Keywords:

screwdriver, rechargeable, DC rotary motor

Abstract

This project presents the fabrication and concept of a rechargeable screwdriver that helps people assemble and disassemble items like cupboards, tables or chairs. The rechargeable screwdriver uses rotational motion with a DC rotary motor. The screws can be driven to tighten or loosen by pushing a switch. The product aims to give better accessibility to all generations of age, from young people to teenagers, adults, and senior citizens, as it will be much easier to use and does not require much force. Besides that, this project also discusses the product's sustainability, where the product's material is mainly focused on cheap but usable items and recyclable and reusable items. In conclusion, the developed prototype of an electric screwdriver is handy for many tasks and comes with different tips for different screws. Overall, the screwdriver is safe and easy to use and is expected to last longer than a typical rechargeable screwdriver.

Downloads

Published

01-06-2024

Issue

Vol. 15 No. 1 (2024)

Section

Articles

License

Journal of Engineering Technology (JET)  is an open-access journal that follows the Creative Commons Attribution-Non-commercial 4.0 International License (CC BY-NC 4.0)

How to Cite

Yusuff Badrisyah bin Mohd Din, Kamariah Md Isa, Ros Atikah Abdul Kadir, Ainaa Maya Munira Ismail, Hazriel Faizal bin Pahroraji, & Ab Aziz bin Mohd Yusof. (2024). FABRICATION OF RECHARGEABLE SCREWDRIVER FOR SMALL-VOLUME ASSEMBLY PROCESS. Marine Frontier, 15(1), 39-46. https://ejournal.unikl.edu.my/index.php/mf/article/view/486